If your device is powered on and you have a computer, you can use the Android Platform Tools Enable Debugging Settings > About phone Build number seven times. Then, go to Developer options and enable USB Debugging Connect to PC : Connect your Tecno Spark 6 Go to your computer via USB. Run Command : Open a terminal or command prompt on your PC and type: adb reboot bootloader The phone will automatically restart into Fastboot Mode How to Exit Fastboot Mode If you need to return to normal operation: Long-press the Power button 8–10 seconds until the device vibrates and restarts.
Now, type this command to boot directly into Fastboot Mode: how to open fastboot mode on tecno spark 6 go
: Completely turn off your device by holding the Power button . If your device is powered on and you
: When the Android Robot with the "No Command" message pops up, release the Enter Recovery : To bypass the "No Command" screen, hold the Power button and tap the Select Fastboot : In the Recovery menu, use the Volume keys to navigate and highlight "Enter fastboot" "Reboot to bootloader" : Press the Power button to select it. Your device will now boot into Fastboot Mode. Method 2: Using ADB (For Computer Enthusiasts) Now, type this command to boot directly into
Press and hold the Volume Up button and the Power button simultaneously.
If your physical buttons are acting up or you prefer using a PC, you can use the Android Debug Bridge (ADB). Prep Your Phone Settings > About Phone Build Number 7 times to enable Developer Options . Then, go to System > Developer options and enable USB Debugging Connect to PC
: While holding the Power button , tap the Volume Up button once to bring up the Recovery menu.