| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Power not reaching the timer motor. | Check Line voltage. Ensure wires are connected to the correct Line terminals. | | Load does not turn on | Trippers are loose or missing. | Tighten tripper screws. Verify trippers are installed at the correct times. | | Switch stays ON constantly | Manual Override is engaged. | Move manual override switch to the "Auto" or center position. | | Switch hums loudly | Loose mounting or internal wear. | Ensure the unit is screwed tightly to the box. If noise persists, mechanism may need replacement. |
While Aritech limits access to certain programming manuals to certified installers Aritech Support Portal ts1162 installation manual exclusive
Exclusive Guidance for Safe and Effective Installation | Problem | Likely Cause | Solution |